Valor Fires Dream 843 Скачать руководство пользователя страница 15

Страница: 15 / 24

6. OPERATING THE HEATER

Never cover the heater or obstruct the opening at the base of the heater, this
could cause overheating and consequent risk of fire.

The appliance can be controlled by the manual control located on the lower left hand
side of the heater or by using the remote control handset.

Remote Control - What do the buttons do?

Pressing the red ‘ON/OFF’ button.

To activate the remote handset it is necessary to press the red
ON/OFF button. The status lamp on the heater will turn red - see
figure 11).

Pressing the ‘LAMP’ button.

This turns the

effect on. The indicator lamp will

flash green for approximately five seconds, after this time the lamp
will no longer be visible.

Pressing the ‘Heat 1’ button.

This turns the

effect and 1 kW heater on. The

indicator lamp will flash amber for approximately five seconds,
after this time the lamp will no longer be visible.

Pressing the ‘Heat 2’ button.

This turns the

effect and 2 kW heater on. The

indicator lamp will flash red for approximately five seconds, after
this time the lamp will no longer be visible.

Pressing the red ‘ON/OFF’ button.

Pressing this button at any time whilst the

effect and heater are in

operation will turn the

effect and heater off.

Figure 11.

Figure 12. lamp locations

Baxi Heating U.K. Limited 2008.

INSTALLER AND OWNER GUIDE

Page 15

Содержание Dream 843

























Результаты поиска

Содержание Dream 843

Отзывы:

Похожие инструкции для Dream 843

Бренды по названию

Популярные бренды

Valor Fires Dream 843, Инструкция для установщика и владельца

Результаты поиска

Содержание Dream 843

Отзывы:

Похожие инструкции для Dream 843

Бренды по названию

Популярные бренды