5. FITTING THE FASCIA
Fitting the Dream fascia.
1.
Remove the fascia from its packaging.
2.
Hold the fascia firmly and lift into place
.
Locate the fascia hanging brackets into
those on top of the heater (See figure 10).
Lower the fascia into place and swing the
bottom of the fascia towards the heater.
3.
Secure the fascia through the holes in
the lower side legs of the fascia using two
washers and two M4 x 25mm screws
supplied (See figure 3).
4.
Place the firefront casting in place.
Position the ash pan cover beneath the
firefront casting.
Figure 10. Fitting the Dream fascia
©
Baxi Heating U.K. Limited 2008.
INSTALLER AND OWNER GUIDE
Page 14
