centrally on top of the hearth in front of the fascia.
Place the bottom front cover casting / ash pan in
position.
Homeflame Harmony model.
15.4.
Fitting the fascia.
1.
Place the top of the fascia against the fireplace
front surface so that the two retaining plates at the
back of the fascia are directly above the two
retaining brackets on the convector box. Keeping the
lower part of the fascia clear of the
ceramic fuel effect, lower the fascia
making sure that the rear retaining plates
locate fully into the retaining brackets on
the convection box (See figure 33). The
fascia bottom is held in place with
magnets. These should be located as in
figure 33.
2.
Supplied with the fire is a self
adhesive control position label. Peel the
backing from the label and place on the
fascia underneath the slider knob (See
figure 30).
©
Baxi Heating U.K. Limited 2008.
Page 33
Figure 33. Fitting the ‘Homeflame Harmony’ fascia
Figure 32. Casting baffle.
Figure 31. fascia fixing.
INSTALLER GUIDE
