Vallox Exxeo, Руководство пользователя

Страница: 5 / 20

5
© Vallox Oy - All rights reserved
MANU
AL
+/ –
Menu
Menu
+
Menu
+/ –
Menu
Menu
+/ –
Menu
Menu
Menu
+
Menu
+/ –
Menu
+/ –
+/ –
+
Use the + button to proceed to the Constant Flow menu.
Use the Menu button to proceed to the setting mode.
Use the +/– buttons to select On or Off. Press Menu to
confirm the setting. Selecting Off takes you back to the
Constant Flow menu.
Selecting On opens the Low Flow Setpoint menu. Use
the Menu button to proceed to the setting mode. Use
the +/– buttons to set the desired value (0.01–5 m³/s).
The Low Flow Setpoint cannot be higher than the
maximum air flow. Press Menu to confirm the setting.
Use the +/– buttons to proceed to the High Flow
Setpoint menu. Use the Menu button to proceed to the
setting mode. Use the +/– buttons to set the desired
value (0.01–5 m³/s). The High Flow Setpoint cannot be
lower than the minimum air flow. Press Menu to confirm
the setting.
Use the + button to proceed to the air flow temperature
compensation menu (NTC 1 Temp).
Use the Menu button to proceed to the setting mode.
Use the +/– buttons to select On or Off. Press Menu to
confirm the setting.
If you choose On, the air flow temperature
compensation menu opens. If the status is active, there
is a dot in the bottom right corner of the display.
Use the + button to proceed to the K value menu. Use
the Menu button to proceed to the setting mode. Use
the +/– buttons to set the K value. Press Menu to confirm
the setting.
Use the + button to proceed to the return menu.
Use the Menu button to return to the Main menu. If the
status is active, there is a dot in the bottom right corner
of the display.