background image

9

© Vallox Oy - All rights reserved

BEFORE BEGINNING MAINTENANCE WORK

The safety switch (S) automatically turns off the power when the door of 

the unit is opened. 
       

WARNING

Always disconnect the power plug before starting the ventilation 

unit maintenance.

There are two unit models, left- (L) and right-handed (R). In the right 

handed version, outdoor air blows into the unit from the right side 

of the centre line as shown in the instructions. In the left-handed 

version, outdoor air blows into the unit from the left side. Also the 

position of the filters, HR cell bypass damper, and heating resistor is 

mirrored in the left-handed model.

CHANGING THE FILTERS

The Vallox ventilation unit has three filters:

•  Coarse filter for supply air filters insects, heavy pollen and other 

relatively large foreign objects out of the outdoor air. 

•  Fine filter for supply air filters microscopic pollen and dust 

particles out of the supply air.

•   Coarse filter for extract air filters the extract air and keeps the heat 

recovery cell clean.

To replace the filters:

1.   Disconnect the ventilation unit from the mains electricity supply.

2.   Open the door of the unit.

CAUTION

The door is heavy.

3.   Remove the old filters (A, B, C) and discard them.

4.   Install the new filters (A, B, C).

5.   Close the door of the unit.

6.  Plug the ventilation unit back into the mains.

7.  The filters have now been successfully replaced.

S

C

A

B

NOTE

Using original Vallox 

filters ensures that the 

ventilation unit remains 

in top condition, giving 

the best results. The 

filter replacement 

interval depends on 

the ambient particle 

concentration. It is 

recommended that the 

filters be replaced every 

spring and autumn, or 

at the very least once 

a year. To select and 

order filter packages, 

please go to: 

filters.vallox.com

MAINTENANCE

NOTE

Vallox TSK Multi 50 MV: 

The service space in 

front of the unit must be 

at least 530 mm. 
Vallox TSK Multi 80 MV: 

The service space in 

front of the unit must be 

at least 600 mm. 

MAINTENANCE

Содержание A3609

























Отзывы: