Vallox A3609, Руководство пользователя

Страница: 11 / 24

11
© Vallox Oy - All rights reserved
CLEANING THE FANS
Check the cleanliness of the fans when servicing the filters
and the heat recovery cell. Clean the fans as required.
You can clean the fan blades with compressed air (wear
protective goggles) or by brushing them gently. Do not
remove or move the fan blade balancing weights.
IMPORTANT
The fans are extremely sensitive to external shocks. It
is recommended that the fans be cleaned in place, i.e.
without attempting to remove them. Remove the fan
beds and the bypass duct carefully in accordance with
the below instructions to prevent damage to the unit.
The small size of the unit restricts the space available
for servicing.
IMPORTANT
Handle the fan blades carefully. Do not remove or
move the fan blade balancing weights.
Cleaning the supply air fan
The steps are mirrored for the left handed unit.
To remove and clean the supply air fan:
1. Disconnect the ventilation unit from the mains electricity
supply.
2. Unfasten the four screws to open the door of the unit.
3. Lift the door off.
CAUTION
The door is heavy.
4. Remove the extract air filter (C), the cell top bracket (E)
and the heat recovery cell (D), as described in sections
“Filters” and “Heat recovery cell”.
5. Remove the mounting screws of the fan bed (2 pcs).
6. Pull the bypass duct/filter stand package out of the unit
and turn to the right.
7. Remove the cable connector (black) of the fan and move
the supply air fan slightly to the right.
8. Disconnect the connector of the post heating resistor.
The post heating resistor can be removed once the
supply air fan has been moved slightly to the right.
9. Tilt the supply air fan to the right and push the
connectors out of the way. Turn the fan 90° and tilt it
forward to pull it out of the unit.
10. The fan has now been removed for cleaning.
11. To reassemble the ventilation unit, follow the above
steps in reverse order.
12. Close the door. Ensure that the safety switch catch of the
door is touching the safety switch.
13. Plug the ventilation unit back into the mains.
The fan has now been checked and cleaned.
NOTE
The steps are mirrored
for the left handed unit.
MAINTENANCE