5
© Vallox Oy - All rights reserved
VENTILATION UNIT CONTROL
Connecting the ventilation unit to the cloud
service
The ventilation unit can be connected to the MyVallox Cloud
cloud service. The cloud service allows for controlling ventilation
remotely also, using e.g. a smartphone or tablet. Also the unit
software is updated automatically through the cloud service.
To connect to the cloud service, the ventilation unit must be
connected to the Internet via LAN and registered with the cloud
service. At the same time you create a MyVallox Cloud account
for yourself. Read more about the service at www.myvallox.com.
Ventilation unit control options.
Operation of the Vallox ventilation unit can be controlled by the
following means:
• Through the control panel installed in the building
• Through the MyVallox Home local area network connection
and the MyVallox Home/Cloud user interface.
• Through the MyVallox Cloud cloud service and the MyVallox
Home/Cloud user interface.
• Through a remote monitoring service or building automation
that uses voltage signals or Modbus messages
In addition to the integrated humidity sensor, ventilation can
also be adjusted automatically using the optional carbon dioxide
and humidity sensors. When these are used, ventilation remains
optimal even when the dwelling is unoccupied.
Each user can use the week clock to adjust the ventilation to fit
their individual lifestyle.
SYSTEM DESCRIPTION
Modbus
1
4
2
3
5
6
MyVallox Cloud
Vallox MV
MyVallox Control
1. Internet
2. WLAN
3. Router
4. WLAN/LAN
5. Additional switch
6. Sensors
INTRODUCTION
NOTE
For the MyVallox Cloud/
Home instructions,
please go to www.
techmanuals.info/
ValloxMV/ENG/
onlinehelp/webhelp
