background image

3

© Vallox Oy - All rights reserved

SAFETY

Safe and appropriate handling requires knowledge of the basic safety 

regulations, and of the intended use of the ventilation system. Read 

this manual before operating the ventilation unit. Retain the manual for 

later reference. If you lose the manual, it can be downloaded from our 

website.
This user manual contains all the information necessary for safe 

operation of the system. All persons who operate and maintain 

the ventilation system must follow the instructions provided in this 

manual. Furthermore, all local accident prevention regulations must be 

observed.

Installation

Installation and setup should be carried out only by qualified experts. 

Electrical installations and connections must be carried out only by an 

electrician and in compliance with local regulations. 

GUARANTEE

The guarantee and liability exclude damage resulting from:

•  Inappropriate use of the ventilation system or the control unit

•  Incorrect or inappropriate installation, setup or use

•  Neglect of instructions concerning transportation, installation, use, 

or maintenance

•  Structural or electronic modifications or changes made to the 

software

INTENDED USE

All Vallox ventilation units have been designed to provide appropriate 

and continuous ventilation so as to present no threat to health and to 

maintain structures in good condition.

IMPORTANT

In order to ensure that the indoor air presents no harm to 

health and remains optimal also for the structures of the 

building, ventilation must be kept on without disruptions. It is 

recommended that ventilation be left turned on during long 

holidays also. This keeps the indoor air fresh and prevents 

humidity from condensing in the ventilation ducts and structures. 

It also reduces the risk of moisture damage.

DISPOSAL OF THE VENTILATION UNIT

Do not dispose of electronic devices with household waste. Follow 

local laws and regulations on safe and ecological disposal of the 

product.

NOTE

For further information, 

go to www.vallox.com

  

INTRODUCTION

WARNING

The unit is not intended 

for use by children 

under 8 or by persons 

with reduced sensory, 

physical or mental 

capabilities, or whose 

lack of knowledge 

and experience do not 

ensure safe operation 

of the unit.
Such persons can 

use the unit under 

supervision, or 

by following the 

instructions of someone 

who is responsible for 

their safety.
Children must be 

supervised and not be 

allowed to play with the 

device.

Содержание 3722

































Отзывы: