Valley VRI-iS, Руководство по установке

Страница: 42 / 102

ICON10 / ICON1 (Continued)
Configure Network
26. Set percent timer to 0% to keep machine from
moving.
27. Verify that all valves are powered up.
Follow the pipeline and look at the LED on each
valve to confirm that it is blinking green. If not,
check the connection to and from the valve.
28. Configure the valve network. See Figure 42-1.
(a) Push Menu , Programs , VRI , and VRI-iS
Diagnostics button to display the VRI-iS
Diagnostics screen. See Figure 42-1.
(b) Push the
Configure Network
button to dis-
play the Configure VRI-iS Network screen.
(c) When prompted to initiate VRI-iS network
configuration, push the
Yes
button.
(d) Wait for network configuration to complete.
When configuration is complete the VRI-iS
Network Configuration Complete screen will
be displayed.
(e) Compare the number of valves configured to
the number of valves on the Sprinkler Chart
that were entered in step 15.
• If more valves were configured than were
entered, go back to step 15 and enter the
installed number of valves.
• If fewer valves were configured than en-
tered, push the Reconfig Network button.
If the result is the same, continue with Test
Valve Operation on the next page.
1
2
3
4
5
6
7
Figure 42-1 1. Menu
2. Programs
3. VRI
4. VRI-iS Diagnostics
5. Configure Network
6. Yes
7. Reconfig Network
42
Setup