Valley VRI-iS, Руководство по установке

Страница: 38 / 102

ICON10 / ICON1
Flow Meter Setup
• If a flow meter will be used in this application con-
tinue with step 1.
• If a flow meter will not be used in this application
continue with step 6.
To set the Flow Meter follow these steps:
1. Push
Menu , System , Data , and Flow/Hours to
display the Flow/Hours screen. See Figure 38-1.
2. Select the
Flow Multiplier
field. See Figure 38-1.
3. Using the numeric keypad, enter the manufactur-
er’s recommended pulse multiplier value in either
gallons per pulse or liters per pulse, depending
on the unit of measure.
4. To enable the Low Flow Limit, select the Low
Flow Limit field to open the numeric keypad.
5. Push the Low Flow Limit field to enter the
minimum flow rate value into the numeric keypad
and push
Enter to retain the value. The range is
1-999 gpm (lpm).
NOTE
• The Low Flow Limit will automatically be
enabled when a valid number is entered
into the keypad, this will be indicated
when the Low Flow Limit checkbox be-
comes checked. A value of 0 disables the
Low Flow Limit.
1
2
3
4
5
6
Figure 38-1 1. Menu
2. System
3. Data
4. Flow/Hours
5. Flow Multiplier
6. Low Flow Limit Field
38
Setup