13
Low Battery Indicator
A standard feature of 4314KV/KVS is a circuit that monitors the output voltage of the internal battery
supply. The Battery Status LED for this feature is located to the far left of the display window.
•
Non lit LED indicates that the batteries are charged and the device can be used.
•
A flashing Low Battery LED, indicates that the batteries will require recharging within the next ½
hours of continuous use. Readings are still within specified accuracies at this point.
•
A Red Low Battery LED indicates that battery is low and that readings should not be trusted. An
overnight recharge should be performed before using the device for critical testing.
NOTE: It is possible for the user to receive a low battery indication on a single range only (particularly the
2Ω and 20Ω range), while the 4314 remains well within operating limits on other ranges.
Unless the user
observes a continuous low battery indication during measurement, readings are still valid.
Standby Mode
Standby Mode is a safety range that allows the user to make connections to a load while there is no
source current applied. The Standby range is purposely positioned as the 8
th
range of the 4314KV/KVS,
so that they adjacent range has the lowest test current.
When in Standby mode, the 4314KV Ohms display will read StdbY. 4314KVS Ohms and Current display
will read StAnd bY.
Содержание 4314KV
