Valhalla Scientific 4314KV, Руководство по эксплуатации

Страница: 12 / 32

5
Chapter 4 – Optional Equipment
Available Options
Listed below are the options available for use with the 4314KV/KVS Series Digital Igniter Testers.
Option A2: Battery Charger
Option "A2" is an AC/DC converter 115-240VAC line voltage to 6VDC at 1.25A with locking ring, sealed
IP68. One charger is provided as a standard accessory with every 4314KV/KVS.
Replacement Batteries
The rechargeable NiMH batteries installed in the 4314KVS should provide years of trouble-free operation.
Replacement, however, will eventually be necessary. The 4314KV/KVS uses four 1.2V cells installed in a
reusable battery box. When ordering replacement batteries, please specify Valhalla Stock #05-10117,
quantity four (4).
AC-115: Continuous Isolated AC Power
Option "AC-115" allows the 4314KV/KVS to be used while plugged to the power source. Internally the
source is isolated from the circuits. When this option is installed, the 4314KV/KVS is no longer battery
powered. (100-240Vac 50-60Hz)
Test Leads
Option K-174: 4-Wire Kelvin Lead Set (RG174 coaxial cable)
Option "K-174" comes standard with each 4314KV/KVS. Option K-174 is a shielded 48" lead set
terminating in ½ inch gold plated clips. The lead set uses RG174 coaxial cable to better fit within the
enclosure.
Option K: 4-Wire Kelvin Lead Set
Option "K" is the recommended general purpose lead set for all Valhalla Ohmmeters. Option K is a
shielded 48" lead set terminating in ½ inch gold plated clips.
Option MP-S: Single Probe Lead Set
Option "MP-S" is a 4-wire lead set terminated in single points. The 4-wire configuration is maintained up
to the point of the probe, eliminating most cable resistance effects. Option MP-S may be used where a
single probe tip is a must.
Option MP-1: Kelvin Micro-Probes
Option "MP-1" is a 48" shielded lead set (dual banana), handheld pencil type, terminated in spring loaded
steel tips with .05" separation (1 amp max.). Special orders or modified versions available upon request.