22
INSTALLATION: Using Lighter Adapter
1.
Slide Lighter Adapter with Articulated Bracket into
cavity on back of Concealed Display Module.
2.
Connect
Acc
on Lighter Adapter to Concealed
Display with 3-inch cord.
3.
Adjust angle on Lighter Adapter, then insert Lighter
Adapter into lighter socket.
4.
Run the power cord from the
Main
jack on the
Lighter Adapter to Valentine One.
5.
To operate, adjust Control Knob and Control Lever
on Valentine One to your desired settings.
IMPORTANT NOTE: Do not use Direct-wire Power
Adapter with Lighter Adapter.
INSTALLATION: Using Mounting Plate
1.
Slide Mounting Plate into cavity on back of
Concealed Display Module.
2.
If using Dual Lock
®
, adhere one square of Dual
Lock
®
to the recess on the back of the Mounting
Plate. Adhere mating Dual Lock
®
square to desired
mounting location.
3.
If using the Direct-wire Power Adapter, follow
instructions on page 19.
4.
Run a power cord from the
Acc
jack on the Lighter
Adapter, or the Accessory jack on the Direct-wire
Power Adapter, to the Concealed Display Module.
5.
Run a power cord from
Main
jack on the Lighter
Adapter, or the Main Unit jack on the Direct-wire
Power Adapter, to Valentine One.
6.
To operate, adjust Control Knob and Control Lever
on Valentine One to your desired settings.
IMPORTANT NOTE: Do not use Lighter Adapter with
Direct-wire Power Adapter.
Valentine One
Pow
e
r
Cord
3-
in
.
Co
n
c
eale
d
D
i
sp
la
y
L
i
gh
te
r
A
d
a
p
te
r
Pow
e
r
Cord
A
cc
M
ain
Valentine One
Power Cord
Direct-wire
Power Adapter
Power Cord
Concealed Display
Ground
(Black)
+12VDC
(Red)
Acc
Main
Lighter Adapter slides into place.
Mounting plate slides into place.
