Hyperion Optical Sensors - Operating Manual:
MANUAL-360093108-14 | issue: 2.1
Page | 15
©
2023
–
Valeport Ltd
6
Operation with 400 Series Instruments
If the Hyperion Instrument is used with a 400 series Instrument e.g. MIDAS CTD+ it should be
configured using Configure software as follows:
Baud Rate:
38400 (#059 38400)
Mode:
Continuous
•
The 400 series Instrument must be configured using DataLog Pro ver 04007125F1 or later
•
Ensure the 400 unit internal Power source (from 0400550) for the Hyperion is connected as
per cable form 0400C321.
•
Ensure the latest version of Hyperion interface code (04007181) is installed in the
Quartzonix Board (0400513)