Valeo Thermo E+ 120, Руководство по ремонту

Страница: 48 / 65

801
Thermo E+ 120/200/320 8 Repairs
8 Burner, components and
heater removal and installation
8.1 General
The safety hints and regulations in Chapter 1 (see 1.6 )
must be adhered.
ATTENTION:
Prior to disassembling components the heater must
be disconnected from the vehicle electrical system
(Observe
5.2 !).
Sealing elements between disassembled compo-
nents must be principally renewed.
This does not apply to the temperature sensor gasket
ring, as it is permanently attached.
Screws with coated threads must be renewed.
Before installing components always check whether
the correct version is available with regard to the
voltage for which the heater is designed or the
heating capacity class.
NOTE:
If components are disassembled to a degree not covered
in this workshop manual, any warranty claim shall be
voided.
Only genuine Valeo spare parts should be used.
Symbol tightening torque:
Features in graphics parts (e.g. nuts, bolts)
that are to be mounted with a specific tigh-
tening torque. The values for the tightening
torque are at the symbol and are binding.
Danger to life and health!
Warning!