Valeo beep&park/vision, Инструкция по эксплуатации

Страница: 6 / 72

6 7
The distances represented by the parking assistance
lines do not correspond to the values displayed:
1.
Check that the camera is between 45 and 60 cm
above the ground.
2. Check that the camera is at the right angle for an
obstacle 2.5 m away, displaying the obstacle in the
center of the screen. If necessary, correct the angle
using adapter rings.
3. Adjust according to the six configurations proposed.
4. Turn the camera on its axis to line up with the horizon.
52
Once reverse gear is selected, an obstacle behind the
vehicle is not detected by the system:
1.
Check that requested height of sensors fitted on the bumper
from the floor is respected (between 45 and 60 cm).
2. Check that requested angle of sensors fitted on the bumper
is respected. If necessary, use the angle correction rings for
the installation.
3. Check that requested distance between sensors on the
bumper is respected (< or = 45 cm).
4. Check that the sensor is not installed upside-down.
5. Unplug one sensor at a time to identify the cause of the
anomaly.
The parking assistance lines are not parallel to the ground
or the parking space:
1.
Check that the camera is between 45 and 60 cm above
the ground.
2.
Check that the camera is at the right angle for an obstacle
2.5 m away, displaying the obstacle in the center of the
screen. If necessary, correct the angle using adapter rings.
3. Adjust according to the six configurations proposed.
4. Turn the camera on its axis to line up with the horizon.
9 11
10
Beep&Park_Vision-2011.indd 6 29/12/11 10:24