RE856
OPERATION MANUAL
AUS
1300 734 253 NZ 0800 734 253
8
SPECIFICATIONS
General Specifications
Measuring method
Resistance: AC four-terminal method
Temperature: NTC thermistor
DC current: hall sensor
A/D conversion
Dual slope method
Display
LCD
Sampling rate
1.3 sets (resistance voltage, temperature and DC current measurements)/second
Open-circuit terminal voltage
5V max.
Input over range
‘OL’ display
Low battery detection
displayed
Test currrent fault detection
‘- - - -’ displayed
Auto power off
If no key operated for 10 minutes
Averaging function
OFF, 4, 8 or 16 times
Beeper function
For warning and fail results (can be turned on or off)
Comparator setting
Resistance / voltage high / low limits
No. of comparator settings
99 sets
Comparator output
LCD display of , or results and beeper for warning and fail
results
Low
In
High
Low
High
Voltage
Resistance
Manual and auto-data
memory
999 sets (can be read by meter and downloaded by PC)
Auto-data logging
Micro SD card 4GB (max. 99 blocks)
Operating environment
0°C to +40°C 80% RH (no condensation)
Storage environment
-10°C to +50°C 80% RH (no condensation)
Power source
Meter = 6x AA size 1.5V alkaline batteries
DCA current adaptor = 1x 9V battery
Max. power consumption
1.0VA
Continuous operating time
5.5 hours approx.
Max. altitude value usable
2000m or less
Size
Meter = 198(L) x 94(W) x 49(T)
DCA current adaptor = 193(L) x 69(W) x 31(T)
Weight
Meter = 530g approx. (including batteries)
DCA current adaptor = 240g approx. (including batteries)
Accessories
Clip-type test lead with temperature sensor, pin-type test lead, DCA current adaptor, zero-
adjustment board, operation manual, batteries, AC adaptor, USB cable, CD PC software
(also available at www.valen.com.au), carrying case.
