Valcourt Antoinette, Руководство пользователя по установке и эксплуатации

Страница: 15 / 48

FP7CE Antoinette - Installation and Operation Manual
15
If you do get brown stains on the glass you can remove them with special cleaners for wood heater glass
doors.
Do not use abrasives to clean your fireplace’s door glass.
The deposits that form on the glass are the best indication of the quality of your fuel and how well you are
doing in operating the fireplace. Your goal should be clear glass with no brown stains. If you continue to see
brown stains on the glass, something about your fuel and operating procedure needs to be changed. Stains
on the glass indicate incomplete combustion of the wood, which also means more smoke emissions and
faster formation of creosote in the chimney.
Do not abuse the glass door by striking or slamming shut. Do not use the fireplace if the glass is broken.
4.1.2 Screen Door Adjustment
1. Lift the screen and the glass door completely to the top.
2. Unscrew one of the two bolts (A) which are located on the lower right of the screen door.
3. Slightly unscrew the other bolt to allow the door adjustment.
4. Move down the screen door to the bottom.
5. To adjust, move the door to the left or right as needed.
6. Without changing the performed adjustment, move up about 6” the screen door.
7. Tighten the 2 bolts.
4.1.3 Glass Door Adjustment
1. Move the screen door completely to the top.
2. Move down the glass door to the bottom.
3. Unscrew the two bolts
(A) which are located on the lower left of the door (See figure in Section 4.1.2:
Screen Door Adjustment ).
4. To adjust, move the door to the left or right as needed.
5. Tighten the 2 bolts