Valcourt Antoinette, Руководство пользователя по установке и эксплуатации

Страница: 18 / 48

18
FP7CE Antoinette - Installation and Operation Manual
The rain cap can be removed for inspection and/or cleaning of the chimney.
The chimney should be swept following these steps:
1)
Remove the fire baffles.
2) Remove the rain cap.
3) Sweep the chimney.
4) Clean the inside of the firebox.
5) Re-install the baffles and the rain cap.
CAUTION: OPERATION OF YOUR FP7CE ANTOINETTE WITHOUT THE BAFFLE MAY CAUSE UNSAFE AND
HAZARDOUS TEMPERATURE CONDITIONS AND WILL VOID THE WARRANTY.
4.2.4 Fire Baffles Removal Prior to Cleaning the Chimney
Before starting to clean your chimney, we recommend that you remove the fire baffles to avoid creosote
dust collection on top of the baffle. (See
Section 5.4.2: Fire Baffles Installation ) Chimney Fire
Regular chimney maintenance and inspection can prevent chimney fires. If you have a chimney fire, follow
these steps:
1. Close the fireplace door and the exhaust damper;
2. Alert your family of the possible danger;
3. If you require assistance, alert your fire department;
4. If possible, use a dry chemical fire extinguisher, baking soda or sand to control the fire. Do not use water
as it may cause a dangerous steam explosion;
5. Check outside to ensure that sparks and hot embers coming out of the chimney are not igniting the
roof;
6. Do not use the fireplace again until your chimney and fireplace have been inspected by a qualified
chimney sweep or a Fire Department Inspector;