V33070-CL
VTM-99-008
6
as the same type to one eye of the gin pole. Slide gin pole into the pipe attachment
and secure.
(6)
Support the second section (item 2, Table 5.1) on the other two saw horses so that
the two sections lie in the same straight line.
(7)
Make sure the threads of the male ferrule on the base section are clear of foreign
material and free of burrs.
(8)
Assemble the second antenna section onto the base section and tighten to align the
arrows at the joint using the strap wrench supplied (item 7, Table 5.1).
(9)
Assemble the third section (item 3 , Table 5.1) to the second section by repeating
steps 6 to 8.
(10)
Assemble the fourth section to the third section by repeating steps 6 to 8.
(11)
After all sections are assembled, assemble the Valcosphere to the top of the fourth
section.
(12)
The antenna now is ready to raise to its final position.
(13)
Tie one rope (from gin pole eye) to the position on antenna specified on Figure 4.1.
A timber hitch knot is recommended to prevent slipping.
(14)
Erect antenna by applying a gradual and constant pull on the rope referred to as the
“Pulling Force” (a winch or vehicle is recommended).
(15)
Once the antenna is in the vertical position, insert retainer pin back into hinge plate,
secure with tension pin. Use bolts (supplied) to secure upper and lower plates of the
hinge plate together.
(16)
Electrical connections can now be made.
4.4
Electrical Installation
Very carefully secure the lead from the transmitter or transceiver to the antenna by means
of the acorn screw and lock-washer provided (items 5 and 6, Table 5.1).
