Features Include:
•
Less than 0.5mm thick (aerial element - excluding connector)
•
4G ready - a built in filter removes any signals received from 4G mobile phone
transmitters which would cause interference & channel loss on TVs
•
High gain and low noise built-in amplifier
•
Suitable for Digital/HD TV reception in strong signal areas
•
Receives all locally available digital TV signals
•
Thin profile ideal for positioning behind picture frames
•
Can be painted to match the surface it is to be mounted on
•
Choice of USB or mains powering for signal amplifier
•
Supplied with 1.5m USB lead and USB mains adaptor
Installation Instructions
1. Plug the mini USB plug on the USB lead supplied into the USB power connector, plug the other end
into the USB power adaptor which is then plugged into a mains socket as shown in Fig. 1.
*Alternatively the USB lead can be powered by any unused USB socket on a TV (available on most
recent TVs) or computer.
2. If your TV has a built-in digital tuner, connect your aerial to the RF input on your TV using the
integrated coax cable supplied.
Alternatively you can use your aerial to provide TV signals to Freeview™ boxes, PVRs, VCRs and other
set top boxes. Connect the coax plug on your aerial lead to the ANT IN socket on your set top box and
connect the set top box to your TV using an HDMI, SCART or RF lead as appropriate (follow your set top
box instructions).
Ultra Thin Amplified Indoor Aerial
Fig. 1
Ready
User GUIde
27801rG
