Valcom V-WMCA, Инструкция по эксплуатации

Страница: 22 / 34

Valcom Master Clock
(V2)
Page 22
System Settings - This link, when clicked, will enter the System Settings pages. These pages include the user pass-
word, the RS485 data rate, setting the offset, the input selection, setting Clock #1 and Clock #2 sync-wire protocol
outputs and resetting the unit back to manufacturer’s default settings.
IP Settings - This link, when clicked, will enter the IP Settings pages. These pages include setting the IP address,
gateway, subnet mask, DNS, DHCP configuration, setting the NTP servers, as well as displaying the status of the de-
vice.
Feature Settings - This link, when clicked, will enter the Feature Settings pages. These pages include setting the dis-
play format in 12 or 24 hour mode, enabling or disabling Daylight Savings Time and editing the standard durations
for each zone.
Database Maintenance - This link, when clicked, will bring the user to the Database Maintenance section. This is
where all of the events and schedules can be saved and backed up. Saved events and schedules can also be
downloaded in this section.
Web Browser Programming
Technician Level Menu
1
2
3
4
5
Diagnostic - This drop-down list allows the user to send the appropriate diagnostics to the analog clocks. See the
analog clock’s manual for descriptions of each diagnostic.
1
2
3
4
5 6
7
8
6
Duration - This field is where the user can select how long (in minutes) that the user wants the diagnostic to display
on the face of the clock.
7
Start Diagnostic - This button, when pressed, will start the selected diagnostic.
8
Menu - This button, when pressed, will bring the user back to the main menu.