Valcom IP bold series, Инструкция по установке и эксплуатации

Страница: 23 / 79

IP BOLD
- installation and operating instructions
23
1. Phone book position for selected button must be permitted
2. Must be fill min. 1 from 5 phone numbers (or IP adresses in P2P mode)
3. At filled phone number is active time plan in appropriate time or no plan
is selected.
When is filled up more numbers then selection of phone number is up time
plan and next are numbers dial in order (1
– 2 … 5) or numbers might be dial
simultaneously and which is picked up first it has the talk.
Both versions of dialling might be combinated. For example is possible call
to 1. and 2. Phone number simultaneously. When call is not picked up until
certain time then number 3 is dialled.
Repeated button press might have following functions:
- Nothing happen
- Dial again
- Call is ended
2.2.2 Button press
– code lock
Door entry IP BOLD buttons have feature of code lock. By progressive
buttons press you can activate appropriate relay. The codes for this feature are
either shared by all subscribers (relays setting) as same as individiual (each
subscriber has in phone book own priváte access code).
Caution: code might be done from available buttons only (for example
model IP IP BOLD-TK4 has available 1,2,3,4)
When button number is first digit o any code then dialling from this button
is delayed about
“time between button press” for code evaluation.
It is also necessary mention feature relay closing by press of selected
button (for example for function bell activation). This feature programmable in
relays petting.
2.2.3 Keypad usage
At models with keypad are 3 ways of dialling:
- By button press as models without keyboard
- Direct phone number dial from keypad
(When you insert IP adress in mode P2P
then dot between numbers group is inserted
by as is usual on IP phones)
- By dial of memory number (phone book
have 999 subscribers. So by dial of
numeral 1-999 is possible make same
fiction as button press).
End of call you can make allways by button press
When keypad is connected the fiction of code lock is extended
I tis possible use whole range of codes (numerals 0-9). The code for
relay activation is differentiate from phone number dial by pressing
in the begining. Then is code for relay activation.