ADjUSTING THE SEAT
FIGURE E
The new “no zip” recline offers an almost infinite amount
of seat adjustments:
1. RECLINE: While squeezing the centre release
mechanism in a pincer action (10), ease the seat down
to the desired position.
2. INCLINE: Place your hand in the centre of the rear of
the seat.
3. Pull the incline strap (11) while gently pushing on the
rear of the seat until the desired position has been
reached.
ALWAYS TEST THAT THE SEAT IS SECURELY LOCKED
IN PLACE BEFORE USE.
USING yOUR HARNESS
FIGURE F
Your Urban stroller is fitted with our unique new multi
point safety harness system. Your child MUST always be
harnessed while in the stroller.
TO SECURE YOUR CHILD IN THE HARNESS:
1. Overlap buckles (12) and (13) so that they fit together
to form one complete buckle.
2. Insert the completed buckle into the Buckle Housing
(14) until it engages securely in place.
3. Carefully adjust the harness straps to snugly fit your
child by adjusting the Sliders located on all Shoulder
Straps, Waist Straps and the Crotch Strap.
The harness should be snugly fitted to the baby’s body,
tight enough so that the baby cannot wriggle itself free of
the straps but loose enough so as not to cause the baby
any discomf
ort.
TO OPEN YOUR HARNESS:
1. Push down on the Buckle Prongs (15, 16).
2. Simultaneously press the release button in the centre
of the buckle (17).
3. Pull the buckles from the Buckle Housing.
Your harness system has been designed to meet very
stringent safety standards and incorporates our unique
secondary action. This helps ensure that your child
cannot release the harness unaided.
E
F
H
10
11
12
13
14
15
16
17
G
18
19
20
