WARNINGS
Your child’s safety is your responsibility ………
• Be sure that all clamps and buckles are securely fixed into place before use.
• Moving parts may be lubricated with silicone spray - DO NOT USE OIL.
• The maximum weight of the child in the model is 18kgs.
• Recommended from birth.
• Your child should never be left unattended. When in the stroller a child must always wear a safety
harness, correctly fitted and adjusted, at all times.
• Do not hang shopping bags from the handle as this may affect the stroller’s stability.
• Always use the basket provided - the maximum weight in the basket is 5kgs.
• The seat fabrics may be washed by gently sponging with mild soap in warm water. Dry naturally.
• Never run with your pram across a road.
• Check all parts before use for breakage or fatigue. Discontinue use immediately if any part is found to
be damaged or broken.
• Do not carry additional children. It may be unsafe to use any accessories other than VALCO approved.
• Make sure that any part of the child’s body is clear of all moving parts before making your adjustments.
• Your VALCO product is intended for domestic use only. It is not intended for commercial use.
• Never carry your stroller with a child in it.
Should the chassis become wet, dry off promptly before storing. If this pram is used near the ocean or salted
roads, spray the chassis and seat frame with water and dry. We recommend a rust inhibiting product should
be used to prevent rust and fatigue on metal parts.
We recommend that you wipe down axles and lubricate the wheels every 3 months. Sand and dirt can grind
down axles, if you live bear the beach or in a dusty environment you must wipe down the axles and wheels
then lubricate them monthly.
AXLES ARE BEST LUBRICATED WITH GREASE OR PETROLEUM JELLY. MOVING PARTS ARE BEST LUBRICATED
WITH SILICONE BASED PRODUCTS. DO NOT USE OIL BASED PRODUCTS.
In Australia/New Zealand
www.valco.com.au
www.valco.co.nz
In North America only
www.valcobaby.com
1 800 610 7850
USING yOUR BRAkES
FIGURE G
1. To lock, simply press down on the rear of the brake lever (18) until the brake pin engages into the wheel cog.
2. To unlock, release the brake pin from the wheel cog by pressing on the front portion of the brake lever (19).
ALWAYS CHECK THAT THE BRAKE PIN HAS ENGAGED IN THE WHEEL COG BY TESTING THAT THE WHEEL
CANNOT ROTATE.
REmOvING/INSTALLING yOUR FRONT BAR
FIGURE H
1. Press the side button (20) while simultaneously pulling at the front bar until it seperates for the housing.
2. Repeat this procedure with the other side.
3. Reverse the process to re-insert the front bar.
valco
baby
