VALBERG 972331, Инструкция по эксплуатации

Страница: 26 / 128

48 49 FR FR
Informations pratiques Informations pratiques
C C
48 49 EN EN
Useful information Useful information
C C
Problems Possible causes Solutions
Tableware does not dry
Incorrect loading.
• Load the dishwasher as
described in this guide.
The tableware was taken
out too early.
• Do not empty your
dishwasher immediately
after washing.
• Open the door to allow
steam to escape.
• Wait until the temperature
inside has decreased and
the tableware is not too hot
to touch before taking them
out.
• Start by unloading the
lower rack to avoid dripping
water onto clean tableware
from the upper rack.
The wrong program has
been selected.
• With a short program, the
wash temperature is lower,
which reduces the wash
performance. Choose a
program with a longer wash
time.
Using cutlery with a low
quality coating.
• Water drainage is more
difficult with these objects.
• This type of cutlery or
tableware should not be put
in the dishwasher.
Error codes
In the event of a malfunction, the dishwasher will display error codes to help you identify
the problem:
Codes Meaning Possible causes
E1 Longer filling time.
The taps are not open, the water
supply is blocked or the water
pressure is too low.
E3
The required temperature has
not been reached.
Heating element malfunction.
E4 Overflow A dishwasher component is leaking.
E8
The distribution valve is pointing
in the wrong direction
Open circuit or defective distribution
valve.
E9
Button held down for more than
30 seconds.
Water or residue on the button.
Ec
Fault with the system that
controls the washing.
Fault with the circuit board or motor.
Ed
Loss of communication between
the primary and display circuit
boards.
Open circuit or broken
communication wiring.
WARNING :
• In the event of an overflow, turn off the main water supply
before calling a technician.
• If there is water at the bottom of the tub due to an overflow
or small leak, this water must be removed before restarting
the dishwasher.