5
EN
Using the appliance
B
Installation
• Contact your nearest approved service agent for the installation of your product.
• The customer is responsible for preparing the location of the appliance and setting up the
electricity, water tap and drainage at the installation site.
• Make sure that the inlet and drain hoses and the power cord are not folded, squashed or
crushed when moving the product to its installation location and after the installation or
cleaning procedures.
• Make sure that the appliance is installed and its electrical connections are established by
an approved service agent. The manufacturer accepts no liability for damage caused by work
carried out by unauthorised individuals.
• Make sure that no faults have been detected in the product prior to installation. Do not
install the product if faults are identified. Damaged products are a safety hazard.
Suitable installation location
• Place the product on a solid, level floor. Do not place your appliance on high pile rugs or
other similar surfaces.
• When the washing machine and dryer are stacked on top of each other, their total weight
(loaded) is 180 kg. Install the product on a solid, level floor with a suitable load-bearing
capacity.
• Do not install the product on top of the power cable.
• Do not install the product in environments where the temperature is below 0°C.
• To reduce vibrations and noise, it is advisable to leave a space around the machine.
• Do not place the product near edges or on a platform if the floor is not level.
• Do not place or use any heat sources (hobs, irons, ovens, etc.) on top of the washing
machine.