Rev. 1.1
１．Safety regulations
WARNING
Do not open the chassis to avoid electric shock.
High-voltage parts are inside.
Use appropriate AC power cord conforming to the standards in the country or region where this product
used.
1) AC100-120V：SVT/AWG18/3m max. withstand voltage 125V min.(UL-approved)
2) AC220-240V：H05W-F/AWG18/3m max. withstand voltage 250V min. (EU-approved)
Plug in AC power cord directly to the outlet.
Do not use a table tap with many other cords at the same time to prevent fire or electrical shock.
Earth ground the product.
If you do not, it may cause an electric shock when you touch both a part with earthing potential
and the power supply at the same time.
Do not touch or plug the AC power cord with wet hand.
It may cause an electric shock.
Whenever trouble occurs, such as smoke, smell, noise or abnormal heat, stop the operation immediately
and turn off the power and unplug the power cord.
Use only LED lighting unit made by VS Technology (Thailand) Co., Ltd.
If you use with other lighting unit, over current may cause a fire or heat.
CAUTION
1. USE the extension or remote cables 3m maximum to prevent power drop by voltage reduction or malfunction
by noise.
2.
Installation of the product
1) Place horizontally in a well ventilated space on the rubber feet at the bottom of the unit.
2) Do not topple or lay on its side.
3) Do not put on unstable or vibrational place.
4) Do not use in environment with humidity, dusty, high temperature or fire.
5) Keep liquids away.
3.
Do not look at the LED directly.
If you see the LED long time, your eyes may be damaged.
4.
Cleaning
Use wet cloth twisted well.
Never use inflammable liquids such as alcohol, benzene or thinner.
Turn off the power and unplug the cord from the outlet while cleaning to avoid any injury or damage of
the unit.
5.
Dispose the product conforming to the law in the region where the product is used.
２．General Description
VLP-2430-4 and VLP-2460-4 are a power supply for VAL series or LED lighting unit made by VS Technology (Thailand)
Co., Ltd.
It can be used with input voltage range with AC100 ～240V and output wattage maximum totally 30W(2430-4) or
60W(2460-4) with 1CH and 2CH and 3CH and 4CH. There are four independent output channels and each channels can
be controlled separately.
Remote control is also available separately in each channels.