A V I O N I C S L I M I T E D
1.4
UNITS AND ACCESSORIES SUPPLIED
1.4.1
INS 422 INSTALLATION KIT (VPN 651001)
VPN DESCRIPTION
QUANTITY
501067 Screw 3/8” 6-32
6
550022 BNC
Connector
3
550062 Contact
Terminal
10
701034 Installation
Manual
1
750014 Connector and Harness
Assembly
1
501057 Fibernut,
6-32
2
501117 Pushbutton,
Momentary
1
1.5
ACCESSORIES REQUIRED (NOT SUPPLIED)
1.5.1
VHF Navigation Antenna
1.5.2
UHF Glide Slope Antenna or VOR Coupler/GS Diplexer
1.5.3
VHF 75 MHz Marker Beacon Antenna
1.5.4
Voltage Reducer (VPN 807000) (Required for 28VDC operation)
1.6 LICENSE
REQUIREMENTS
1.6.1
No license is required to operate the INS 422.
1.7
STATEMENT OF COMPLIANCE
This equipment has been tested in accordance with the requirements contained
in the appropriate Commission Regulations. To the best of my knowledge, these
tests were performed using measurement procedures consistent with industry or
Commission standards and demonstrate that the equipment complies with the
appropriate standards. Each unit manufactured, imported or marketed, as
defined in the Commission’s regulations, will conform to the sample(s) tested
within the variations that can be expected due to quantity production and testing
on a statistical basis. I further certify that the necessary measurements were
made by the engineering department of Val Avionics, Ltd. located at 3280 25
th
Street SE in Salem, Oregon.
James
L
Harr,
Chief
Engineer
INS 422 Installation/Owners Manual
Original Issue – June 2001
VPN 701034
8