Vaisala WAC155, Руководство пользователя

Страница: 28 / 58

More information
‣ SETMEA (page 38)
‣
SETALR (page 41)
3.7 Configuration
WAC155 default settings are suitable for Vaisala Anemometer WAA151 and Vaisala Wind Vane
WAV151. No configuration is needed.
If you have WA25 wind sensors, you must configure WAC155. See Configuring
WAC155 for WA25 (page 26) .
3.7.1 Configuring WAC155 for WA25
You must configure WAC155 for WA25. With default settings WAC155 and WA25 sensors can
return null fields.
Type commands on a single line and terminate them with a line feed <lf> or a
carriage return <cr> character. Separate parameters and values by a space.
1. Open a serial connection to WAC155. The default settings are 9600 bps, 8 N 1 .
2. To open a connection for commands, type OPEN [ id ] <cr> .
open $
3. To set the
spdvoltlimit
parameter, type
SETALR spdvoltlimit 0
.
4. To set the dirvoltlimit parameter, type SETALR dirvoltlimit 0 .
5. To set the powersave parameter, type SETMEA powersave 0 .
6. To get the parameters into use, reset WAC155 by typing RESET .
More information
‣ Communication Interfaces (page 30)
‣ Service Connection (page 33)
WAC155 User Guide M210822EN-E
26