Vaisala WAC155, Руководство пользователя

Страница: 47 / 58

4.3.14 HELP
The HELP command displays a list of supported commands.
HELP<cr>
Example
>help
CLOSE Close service connection
SETDEV Set device
IDSETSPD Speed computation average length
SETDIR Direction computation average length and offset
...
4.3.15 INIE
The INIE command resets the transmitter parameter set to factory default. Note that the
current configuration settings are lost.
Before using this command, view the current settings with GETSET and save the
output.
After using this command, you must reset the transmitter with the
RESET
command. This is to
ensure that the default values are correctly validated.
The factory default values for all parameters are shown in the
GETSET
message example.
INIE <cr>
Example
>inie
FACTORY DEFAULTS
>
4.3.16 RESET
The RESET command resets the transmitter and takes any new configuration settings into use.
After receiving this command, the transmitter returns into the data transmission mode. To
continue with the service connection, enter the OPEN command again.
Chapter 4 – Operation
45