User's Guide _______________________________________________________________________
40 ___________________________________________________________________ M211399EN-G
List of Serial Commands
Some commands, such as
RSEL
, are not available if the required feature
is not present on the transmitter, or the command is not relevant.
All commands can be issued either in uppercase or lowercase. In the
command examples, the keyboard input by the user is in
bold
type.
The notation <cr> refers to pressing the carriage return (
Enter
) key on
your computer keyboard. Enter a <cr> to clear the command buffer
before starting to enter commands.
Table 7
Basic Serial Commands
Command
Description
?
Show transmitter information.
CALCS
Show all measured and calculated parameters.
ECHO
Show or set remote echo mode.
ENV
Show or set environmental parameters.
ERRT
Show error table.
ERRS
Show currently active errors.
FORM [modifier string]
Show or set output format.
HELP
Show list of currently available serial commands.
INTV [0 ... 9999 s/min/h] Set continuous output interval for R command.
PASS [9000]
Access advanced serial commands.
R
Start the continuous outputting.
RESET
Reset the transmitter.
S
Stop the continuous outputting.
SDELAY [0 ... 255]
Show or set serial line turnaround delay in
milliseconds.
SEND
Output measurement message once.
SNUM
Show transmitter serial number.
STATUS
Show transmitter status.
UNIT [m/n]
Select metric or non-metric units.
VERS
Show transmitter firmware version.
Table 8
Advanced Serial Commands
Command
Description
AMODE
Show or set analog output mode.
AOVER
Show or set analog output overrange and clipping
behavior.
ASEL
Show or set analog output parameter.
ATEST
Test analog putput.
BACNET
Show or set BACnet parameters.
CDATE
Show or set calibration date.
CRH
Calibrate and adjust RH measurement.
CT
Calibrate and adjust T measurement.
CTEXT
Show or set calibration information.
DSEL
Select parameters to display on screen.
FRESTORE
Restore transmitter to factory settings.
RMODE
Show or set relay operation mode.
RSEL
Show or set relay parameter and limits.
RTEST [open/closed]
Test relay operation.
