User's Guide ______________________________________________________________________
22 _______________________________________________________________ M210701EN-A
Removing and Fastening the Probe
Fixed Probe Model
2
1
3
4
Remove and replace the probe as follows:
1.
Loosen the plastic probe cover by carefully turning
it counter clock wise.
2.
Remove the probe cap and O-ring.
3.
Remove the probe cover. The probe is now exposed.
4.
Unscrew the small sleeve that is securing the probe
in place and pull out the probe.
5.
Replace the probe and screw back on the small
sleeve securing the probe tightly in its place.
6.
Replace the probe cover and screw it tightly back in
its place.
7.
Replace the O-ring and probe cap.
0505-181
Figure 12
Removing the Humidity Probe (Fixed Probe Model)
The following numbers refer to Figure 12 above:
1
=
Probe cap
2
=
Probe cover
3
=
O-ring
4
=
HMP100 probe
Remote Probe Model
1.
Unscrew the small sleeve that is securing the probe in place at
the end of the probe cable and pull out the probe.
2.
Replace the probe and screw back on the small sleeve securing
the probe tightly in its place.
