manualshive.com logo in svg

Vaisala HUMICAP HMT100, Руководство пользователя

Поделиться
Скачать
Vaisala HUMICAP HMT100 Скачать руководство пользователя страница 17

Chapter 3 _______________________________________________________________ Installation

VAISALA____________________________________________________________________ 15

Installation with Rain Shield

The rain shield with installation kit includes a metal mounting plate
and a rain shield for the transmitter. Vaisala order code: 215109.

050505-340

Figure 5

HMT100 Installation with Rain Shield

1.

Fasten the metal mounting plate to the wall or pole with screws
(see Figure 5 above).

NOTE

!

 Note the arrow on the mounting plate. Attach the mounting plate

with the arrow pointing upwards.

2.

Fasten the plastic wall assembly plate (provided) to the metal
mounting plate with three screws.

3.

Fasten HMT100 Humidity and Temperature Transmitter to the
wall assembly plate by pressing the transmitter down so that it
slides down along the rails of the mounting plate.

4.

Fasten the rain shield to the metal mounting plate with two (M6)
mounting screws.

NOTE

Remove the rain shield before taking out the HMT100.

Содержание HUMICAP HMT100

















































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды