Installation_________________________________________________________________________
Vaisala _________________________________________________________________________ 22
F
IGURE
3-7
Installing the sensor head through the
DMP248BVS ball valve assembly.
Install the sensor head transversely against the direction of the process
flow.
NOTE
Installation or removing the probe through a ball valve assembly is
possible without shutting the process when the pressure is less than 10 bar.
With 10...40 bar pressures you must shut down the process before
installing or removing the probe. The maximum operation pressure for the
probe HMP368 is 40 bar.
1. sensor head
2. handle of the ball
valve
3. ball of the ball valve
4. process chamber /
pipeline
5. manual press tool
6. the groove on the
probe indicates the
upper adjustment limit
7. filter
1
2
3
4
5
6
7
