Vaillant VED E 18/7 E HK, Инструкция по использованию и установке

Страница: 9 / 44

Functions and operation
Operating instructions for the electronicVED exclusive electric instantaneous water heater 0020176440_00
7
3
>
Undo the four screws ( 1 ) on the rear side of the radio
remote control.
>
Open the rear side.
>
Insert the two batteries (AA type).
>
Screw the front and rear sides of the radio remote con-
trol back together.
>
Take extra care to ensure that the seal is correctly
inserted when reassembling the remote control.
b
Caution.
Possible water damage to the remote
control.
The remote control is water-tight in accord-
ance with the IP 68 level of protection. This
dictates that the seal should be correctly
inserted in the rear cover of the remote
control. If this is not the case, water can
enter and damage the remote control.
>
Ensure that the rubber seal is correctly
inserted when changing the batteries.
i
Spent batteries should not be disposed of with
household waste. Observe local regulations
when disposing of them.
3.2 Setting the display parameters
i
The electronicVED exclusive display can be, but
does not have to be, set up before checking the
function. It is sensible to first only set the
desired hot water temperature.
The current performance features of the electronicVED
exclusive are displayed as soon as the unit is connected and
configured. When in operation, the display shows the
selected water temperature. Furthermore, the maximum
water temperature that can be set will be displayed on the
uppermost display line. This maximum temperature can be
set freely and can be between 30 °C and 60 °C. The follow-
ing display is an example of this.
max. 42 °C
42.0 °C
- +
MEMO eco
  
The set target temperature is factory-set to 42 °C.
The setting and display options for your VED display are
described in the following excerpts in the order that they
appear in the menus.
To access the current temperature setting quickly, you
always have two options:
>
Set the current hot water temperature directly by using
the
+ / — buttons.
or
>
Set the current hot water temperature using the
MEMO
button.