Vaillant VED E 18/7 E HK, Инструкция по использованию и установке

Страница: 35 / 44

Start-up/decommissioning
Installation instructions for the electronicVED exclusive electric instantaneous water heater 0020176440_00
15
5
5.3 Setting the display parameters
i
The electronicVED exclusive display can be, but
does not have to be, set up before checking the
function. It is sensible to first only set the
desired hot water temperature.
The current performance features of the electronicVED
exclusive are displayed as soon as the unit is connected and
configured. When in operation, the display shows the
desired water temperature. Furthermore, the maximum
water temperature that your VED provides will be displayed
on the top display line. This maximum temperature can be
set freely and can be between 30 °C and 60 °C. The follow-
ing display is an example of this.
max. 42 °C
42.0 °C
- +
MEMO eco
  
The set target temperature is factory-set to 42 °C.
To access the current temperature setting quickly, you
always have two options:
>
Set the current hot water temperature directly by using
the
+ / — buttons.
or
>
Set the current hot water temperature using the
MEMO
button.
i
The settings for the installer menu on the elec-
tronicVED exclusive display are described below.
You can find a detailed description of all the dis-
play functions in the instructions for use
included in this document.
5.3.1 Calling up the installer menu
>
Press and hold the
Memo
button for longer than 3 sec-
onds to access the installer menu.

Appliance data
Remote control
 
ok

  
Using this menu, you have access to the current and cumu-
lated unit data and to the settings for the remote control.
5.3.2 Displaying unit data
You are in the installer menu. The cursor is next to the
Appliance data
menu point.
>
Press the
ok
button.
Display Appliance data

current
cumulated
 
ok

  