Supplied By www.heating spares.co Tel. 0161 620 6677
47
PARTS REPLACEMENT
1
2
4
3
8
9
5
7
6
Fig. E.4: Fan
Euro B/S 162/0
Fan
●
Refer to the important information
and initial preparation on page 45.
●
Remove combustion chamber cover
by unclipping the three clamps (
1
).
●
Remove the screw (
3
) and push the
flue connector (
4
) upwards until it
clears the fan outlet (when the
boiler is installed with a rear outlet
flue system push the flue connector
(
4
) towards the rear of the boiler
until it clears the fan outlet).
●
Disconnect the electrical
connections (
5
) and the air tubes (
6
and 7
) from the fan. Note the
respective connection points for
each tube.
●
Remove two screws (
8
) and remove
the fan (
9
).
●
Reassemble in reverse order,
ensuring that the air tubes are
reconnected to the correct nipple.
●
Re-fit combustion chamber cover
and front casing.
