background image

19

Operating Manual geoTHERM exclusive VWS 0020071929_00

Display shown

Description

Factory setting

HK2

 2

Parameters

Operating mode heating 

>Auto

Set value day

22°C

Night set back temp.

15°C

>Select operating mode

The 

Room set target temperature

 is the tempera-

ture to which the heating should be regulated in the 
operating mode "Heat" or during the time slots.

 

 

 

Note: Select a room temperature that is just high 
enough to ensure your personal well-being
(e.g. 20 °C). Each degree over and above the set 
value means an increase in energy consumption of 
around 6 % per annum.

The 

Set-back temperature

 is the temperature to 

which the heating is regulated during the set-back 
period. An individual set-back temperature can be 
set for each heating circuit.

The set operating mode determines under which 
conditions the assigned heating circuit or hot water 
circuit should be regulated.

 

The following operating modes are available for 
heating circuits:

Auto: 

The operation of the heating circuits alter-

nates between the Heating and Energy Saving oper-
ating modes in accordance with a settable timer pro-
gramme.

Eco: 

The operation of the heating circuits alternates 

between the Heating and Off operating modes in ac-
cordance with a settable timer programme. The
heating circuit is switched off during the set-back 
period provided the frost protection function (which 
depends on the outside
temperature) is not activated.

Heating:

 The heating circuit operates at the room 

set target temperature regardless of any settable 
timer programme.

Energy sav: 

The heating circuit operates at the set-

back temperature regardless of any settable timer 
programme.

Off: 

The heating circuit is off, provided that the frost 

protection function (depending on the external tem-
perature) is not activated.

Note:

Additional heating circuits are displayed, depending 
on the system configuration.

Room set target 
temp.: 20°C

Set-back temp.: 
15°C

Table 5.1  Adjustable parameters at the operator level (contd.)

Operation 5

Содержание geoTHERM exclusive

































Отзывы: