Vaillant geoTHERM exclusive, Руководство по эксплуатации

Страница: 13 / 32

13
Operating Manual geoTHERM exclusive VWS 0020071929_00
5 Operation
5.1 Familiarising yourself with and operating the
controller
Basic data
Date
Day of week
Time
Set day
2
1
3
4 5
6
Fig. 5.1 Sample illustration no. 3Fig. 7.1 Overview of operation
Key
1 Menu name
2 Cursor indicating the selected parameter
3 Menu
number
4 Dial ,
Set parameter (turn), Select parameter (press)
5 Dial ,
select menu (turn), activate special operating mode (press)
6 Information line (handling request shown in example)
All programming of the heat pump is carried out by
means of the two dials ( and ) on the controller.
The dial is used to select the parameter (by pressing)
and to alter the parameter
(by turning). The dial is
used to select the menu (by turning) and to activate
special functions (by pressing).
5.1.1 Calling up the screens
The menus are identified by a number at the top right of
the display. You can access the next menu by turning
the dial. The numbers make it easier to find individual
menus during programming.
Typical operating sequence on the operator level
• Turn the dial until the menu
required has been selected.
• Turn the dial until the pa-
rameter to be modified has
been selected.
• Press the dial to mark the
parameter to be modified.
The parameter will be high-
lighted on a dark background.
• Turn the dial to modify the
parameter setting value.
• Press the dial to mark the
setting value to be accepted.
• Repeat this sequence until all
the settings have been made.
Operation 5