Notes on the documentation 2
0020196671_06 eloSTOR pro Installation and maintenance instructions
5
2
Notes on the documentation
2.1
Observing other applicable documents
▶
You must observe all the operating and installation in-
structions included with the system components.
2.2
Storing documents
▶
Pass these instructions and all other applicable docu-
ments on to the system operator.
2.3
Validity of the instructions
These instructions apply only to:
Product article number
VEH 50/7-3
0010016657
VEH 80/7-3
0010016658
VEH 100/7-3
0010016659
VEH 120/7-3
0010016660
3
Product description
3.1
Identification plate
The identification plate is located on the lower side of the
product.
The identification plate contains the following information:
Information
Meaning
Serial no.
Serial number
VEH XX 7-3
Type designation
l
Fill quantity
3/N/PE 400 V
1/N/PE 230 V
~ 50/60 Hz
Electrical connection data
MPa (bar)
Max. operating pressure
IP25D
IP rating
VDE mark
3.2
CE label
The CE label shows that the products comply with the basic
requirements of the applicable directives as stated on the
identification plate.
The declaration of conformity can be viewed at the manufac-
turer's site.
3.3
Design
4
1
2
6
7
8
5
3
1
Product bracket
2
Domestic hot water
cylinder
3
Rotary knob
4
Cold water connection
5
Mains connection line
6
Hot water connection
7
Rapid heating button
8
Signal lamp
The cylinder is equipped with external heat insulation. The
cylinder vessel is made of enamelled steel. The heating ele-
ments that transfer the heat are located inside the vessel. As
additional corrosion protection, the vessel has a magnesium
protection anode.
4
Set-up
4.1
Checking the scope of delivery
▶
Check that the scope of delivery is complete.
Quantity
Component
1
Domestic hot water cylinder
1
Product bracket
1
Installation template
1
Operating instructions
1
Installation and maintenance instructions
Applicability:
VEH 80/7-3
Quantity
Component
1
Connector 0020192421
1
Connector 0020192422
