Adapting the boiler to the heating installation
38
Installation and maintenance instructions ecoTEC pro 0020129672_03
11
11 Adapting the boiler to the heating
installation
You can find all setting options in the diagnostic codes in
the installer level (
¬ section 9.2
).
11.1
Diagnosis codes – Overview
You can use the parameters that are marked as adjustable
in
¬ table 11.1
to adapt the boiler to the heating installation
and the needs of the customer:
i
You can enter your settings in the last column
after setting the system-specific parameters.
>
Switch to the installer level (
¬ section 9.2
) and select
the diagnostic codes.
>
Press the minus button
or the plus button
to switch between the displayed diagnosis
codes.
With modifiable parameters:
>
Press the right-hand selection button
to
select the parameter to make a change.
>
Press the minus button
or the plus button
to change the current setting.
>
Press the right-hand selection button
to con-
firm the change.
The change is saved.
