Decommissioning 11
0020134823_04 ecoTEC plus Installation and maintenance instructions
35
1.
Disconnect the unit from the power mains and secure it
against being switched back on again.
Conditions
: Replacing the display
or
PCB
▶
Replace the PCB or display according to the assembly
and installation instructions supplied.
Conditions
: Replacing the PCB
and
display at the same time
▶
Select the required language.
◁
If you are replacing both components at the same
time, the product switches directly to the menu to
select the language after switching on. The default
language setting is English.
▶
Confirm your setting by pressing (
OK
).
◁
You are automatically taken to
D.093
to set the
device specific number.
▶
Select the correct value for the relevant product type in
accordance with the following table.
Device Specific Numbers (DSN - Device Spe-
cific Number) for the product types
Product type number
806 (VU GB 806/5
‑
5)
82
1006 (VU GB 1006/5
‑
5)
81
1206 (VU GB 1206/5
‑
5)
80
▶
Confirm your setting.
◁
The electronics are now set to the product type and
the parameters of all diagnostics codes are set to
default settings.
◁
The display automatically restarts with the installation
assistant.
▶
Make the system-specific settings.
10.11 Completing repair work
▶
Check that the product functions correctly and check the
leak-tightness (
→
Page 24).
11 Decommissioning
11.1
Decommissioning the product
▶
Switch off the product.
▶
Disconnect the product from the power mains.
▶
Close the gas isolator cock.
▶
Close the cold water stop valve.
▶
Drain the product. (
→
Page 31)
12 Recycling and disposal
Disposing of the packaging
▶
Dispose of the packaging correctly.
▶
Observe all relevant regulations.
13 Customer service
To ensure efficient and reliable operation of your boiler it is
recommended that regular servicing is carried out by your
service provider.
