4 Installation
10
Installation and maintenance instructions ecoTEC plus 0020134823_04
4.7
Wall-mounting the product
Conditions
: The load-bearing capacity of the wall is sufficient, The fixing
material may be used for the wall
▶
Wall-mount the product as described.
Conditions
: The load-bearing capacity of the wall is not sufficient
▶
Ensure that wall-mounting apparatus on-site has a suf-
ficient load-bearing capacity. Use individual stands or
primary walling, for example.
▶
Do not wall-mount the product if you cannot provide
wall-mounting apparatus with a sufficient load-bearing
capacity.
Conditions
: The fixing material may not be used for the wall
▶
Wall-mount the product as described using the permitted
fixing material provided on-site.
1
1.
Install the hanging bracket
(1)
on the wall.
2.
Suspend the product on the hanging bracket from
above using the suspension bracket.
4.8
Removing/installing the front casing
4.8.1
Removing the front casing
2
1
1.
Undo the bolt
(1)
.
2.
Push in both retaining clips
(2)
so that the front casing
is released.
3.
Pull the front casing forwards at the bottom edge.
4.
Lift the front casing upwards from the bracket.
4.8.2
Installing the front casing
1.
Place the front casing on the upper brackets.
2.
Push the front casing onto the product until both retain-
ing clips
(2)
snap into place at the front casing.
3.
Secure the front casing by tightening the bolt
(1)
.
4.9
Removing/fitting the upper casing
4.9.1
Removing the upper casing
2
1
1.
Unscrew the screws
(2)
.
2.
Pull out the upper casing
(1)
towards the front.
4.9.2
Installing the upper casing
1.
From above, place the upper casing
(1)
on the product.
2.
Use the screws
(2)
to secure the upper casing
(1)
.
