Product description 3
0020230532_02 ecoFIT pure Operating instructions
9
Information
on the identi-
fication plate
Meaning
Condensing
technology
Efficiency class of the boiler
in accordance with EC Dir-
ective 92/42/EEC
Type: Xx3(x)
Permissible flue gas connec-
tions
PMS
Maximum water pressure in
heating mode
PMW
Maximum water pressure in
hot water handling mode
V/Hz
Electrical connection
W
Max. electrical power con-
sumption
IP
Level of protection
Heating mode
Hot water generation
P
n
Nominal heat output range
in heating mode
P
nc
Nominal heat output range
in heating mode (condensing
technology)
P
Nominal heat output range
in hot water handling mode
Q
n
Nominal heating load range
in heating mode
Q
nw
Nominal heating load range
in hot water handling mode
T
max.
Max. flow temperature
NOx
NOx class for the product
Code (DSN)
Specific product code
Read the instructions.
GC no.
Gas council number
3.5 Serial number
The serial number is located on a plastic
plate at the bottom of the front casing.
3.6 CE label
The CE label shows that the products
comply with the basic requirements of the
applicable directives as stated on the iden-
tification plate.
The declaration of conformity can be
viewed at the manufacturer's site.
3.7 Benchmark
Vaillant is a licensed member of the
Benchmark Scheme which aims to im-
prove the standards of installation and
commissioning of domestic heating and
hot water systems in the UK and to en-
courage regular servicing to optimise
safety, efficiency and performance.
Benchmark is managed and promoted
by the Heating and Hotwater Industry
Council. For more information visit
www.benchmark.org.uk.
▶
Please ensure that the installer has fully
completed the Benchmark Checklist on
the inside back pages of the installation
instructions supplied with the product
and that you have signed it to say that
you have received a full and clear ex-
planation of its operation. The installer
is legally required to complete a com-
missioning checklist as a means of
complying with the appropriate Build-
ing Regulations (England and Wales).
All installations must be notified to Local
Area Building Control either directly or
through a Competent Persons Scheme.
A Building Regulations Compliance Certi-
ficate will then be issued to the customer
