2 Notes on the documentation
6
Installation and maintenance instructions auroTHERM exclusive 0020077989_04
2
Notes on the documentation
2.1
Observing other applicable documents
▶
Always observe all the operating and installation instruc-
tions included with the system components.
2.2
Storing documents
▶
Pass these instructions and all other applicable docu-
ments on to the end user.
2.3
Validity of the instructions
These instructions apply only to:
Product article number
VTK 570/2
0010002225
VTK 1140/2
0010002226
3
Product description
3.1
Product overview
1
2
702
1392
16
52
111
1
VTK 1140/2
2
VTK 570/2
3.2
Information on the data plate
Information on the data
plate
Meaning
Solar Keymark:
The collectors have been success-
fully tested according to the rules
and requirements for the Solar Key-
mark.
Read the set-up instructions.
VTK 570/2
VTK 1140/2
Type designation
VTK
Vaillant tube collector
570, 1140
Collector output
/2
Unit generation
Information on the data
plate
Meaning
auroTHERM exclusive
Unit type
Vacuum tube collector
Tube collector
AG
Gross area
AA
Aperture surface area
VF
Liquid volume
m
Weight
l
Dimensions
Q
max
Max. output
tstgf
Stagnation temperature
P
max
Max. permissible operating pressure
Barcode with serial number
The 7th to 16th digits of the serial
number form the article number
3.3
CE marking
The CE marking shows that the products comply with the
basic requirements of the applicable directives as stated on
the data plate.
The declaration of conformity can be viewed at the manufac-
turer's site.
4
Set-up
4.1
Preparing on-roof mounting and flat-roof
installation
4.1.1
Storing the product
▶
To prevent moisture from penetrating into the collector,
always store the collectors dry and in a weatherproof
area.
4.1.2
Transporting the product
1.
To protect the collectors against damage, always trans-
port them when they are in a horizontal position.
2.
To transport packaged collectors, use the carrying
loops that are punched into the cardboard packaging.
3.
To transport unpackaged collectors, use the retaining
straps that are attached to the sides.
4.
To transport the collectors to the roof, use a crane, in-
clined lift or similar equipment.
