1 Safety
6
Installation and maintenance instructions atmoTEC exclusive, atmoTEC plus 0020214272_04
▶
Ensure that no chemical substances are
stored at the installation site.
▶
If you are installing the product in
hairdressing salons, painter's or joiner's
workshops, cleaning businesses or similar
locations, choose a separate installation
room in which the room air is technically
free of chemical substances.
▶
Ensure that the combustion air is not
routed through chimneys which have
previously been used with floor-standing
oil-fired boilers, or with other boilers,
which could cause soot to build up in the
chimney.
1.14 Risk of being burned or scalded by
hot components
▶
Only carry out work on these components
once they have cooled down.
1.15 Risk of injury due to the heavy
weight of the product
▶
Make sure that the product is transported
by at least two people.
1.16 Risk of material damage caused by
frost
▶
Do not install the product in rooms prone
to frost.
1.17 Risk of material damage caused by
using an unsuitable tool
▶
Use the correct tool.
1.18 Regulations (directives, laws,
standards)
▶
Observe the national regulations, stand-
ards, guidelines and laws.
