COMMISSIONING
35
Step 5
Assembly instructions:
1. Push the profile into the holder as illustrated
2. Check for firm seating.
NOTICE!
►
Make sure that the holders have properly
snapped in place.
CAUTION!
During installation work, there is risk of suffering
crush injuries to the limbs in the areas between the
individual parts!
During installation work, there is risk of suffering
crush injuries to the limbs in the areas between the
individual parts.
►
Watch out for your limbs.
►
Wear personal protective equipment. (see chap-
ter: 2 )
Step 6
Assembly instructions:
1. Mounting the end segment.
2. Pull the conductor rail from the insulating hous-
ing for approx. 100 mm.
3. Slide the conductor rail and insulating housing
into the transfer guide with screw terminal up to
the stop.
4. Tighten the countersunk screw on the screw ter-
minal with tightening torque = 2 Nm.
