COMMISSIONING
21
CAUTION!
Do not draw the heating wire through the lower "free
space section", as the conductor rail and current col-
lector could be severely damaged. There is also an in-
creased risk of short circuits!
►
Only draw the heating wire into the conductor rail
profile as shown.
NOTICE!
It is recommended to draw the heating wire into the
conductor rail profile prior to installation.
Installing the feed terminal
Step 5
Assembly instructions:
1. Connect the heating conductor/PTC thermistor
as described in chapter: “ Connection or repair of
heating conductors“.
Step 6
Assembly instructions:
1. Slide the terminal cap over the connected heat-
ing conductor as shown. Check that the cover has
engaged properly.
Step 7
Assembly instructions:
1. Tighten the strain relief and check everything is
firmly seated.
