VAF instruments Viscosense 3, Инструкции по установке, эксплуатации, уходу и обслуживанию

Страница: 19 / 42

17
6.7
I
NSTALLATION CHECKLIST VERSION 1.0
ViscoSense
®
Sensor: Yes No
 The ViscoSense
®
housing has been installed according the below set-up.
(Mark what is correct)
 Capacity circulation fuel pomp _________ m3/h
 Does the ViscoSense® housing size match the capacity circulation fuel pomp?
DN50 max. 20m3/h
DN65 max. 34m3/h
DN80 max. 51m3/h
DN100 max. 80m3/h
 Has the ViscoSense
®
housing been installed correct according the fuel flow direction?
 Has the inlet and outlet piping sufficiently been supported (as per 6.4.2)?
 Have fuel pressure dampers been installed at the engine?
 Is a pressure regulating valve installed within the fuel system ?
 Is an air pocket present in the mixing tank?
 Have isolating and bypass valves been installed at the ViscoSense
®
sensor?

Has the ViscoSense
®
interface box been installed away from the heater?

The ambient temperature at the ViscoSense
®
interface box is not higher than 55
⁰
C?